DOWNLOAD INSTALLATION MANUAL

Install Horizontal or Vertical

We’ve designed our wall control to suit most common Australian wall mounting systems, so it fits neatly into standard installations without the need for special adaptors.

It can be mounted vertically or horizontally to suit your layout. During installation, the display screen and isolation switch can be rotated, so the interface always reads the right way up, whatever the mounting position.

Full Functionality

Fan Control

Turn fan on/off and adjust the speed, with current speed displayed.

Light Control

Turn light on/off and adjust brightness (9 levels) with current level displayed. Press & hold the light button to adjust colour temperature.

Isolation Switch

Turns the wall control and fan power on or off

Change Fan Diection

Adjust your fan for summer or winter mode by holding both fan direction buttons together.

Set Timer

Press and hold both light direction buttons. The timer icon (T) will appear on the display.
Use the + or – buttons to select the timer duration.
Available timer settings: Off, 1hr, 2hr, 4hr or 8hr.

Button Tone On/Off

Press and hold for 4 seconds to enable or disable the confirmation beep when a button is pressed.

Removing the Cover

How does this wall control work?

The wall control talks to your fan wirelessly using RF (radio frequency), so there’s no extra wiring between the control and the fan. To set it up, press and hold the Fan ON/OFF button during installation until you hear a long beep. That beep confirms the wall control is paired with your fan.

Can I still use my remote with the wall control?

Yes. The wall control works alongside your handheld remote. If you’ve added the optional SMART module, you can use SMART control as well. Pairing instructions are in the manual

Does the wall control need batteries?

No. It’s hard-wired to your home’s power, so there are no batteries to buy or replace.

Do I need a separate isolation switch?

No. An isolation switch is built into the wall control.

Can I mount it horizontally?

Yes. You can install the wall control either vertically or horizontally to suit your wall and décor.

What can I control from the wall control?

You get full control of your fan and light, including:
Fan speed
Fan ON/OFF
Forward and reverse modes (summer and winter airflow)
Light ON/OFF
Light dimming
Colour temperature (CCT) adjustment
Timer functions

Do I need an electrician to install it?

Yes. Because the wall control is hard-wired, installation must be carried out by a licensed electrician in accordance with local wiring regulations.

Will it replace my existing wall switch?

Yes. The wall control replaces your existing fan wall switch. Please note that it requires a neutral wire at the wall switch location. If you’re not sure whether your wiring includes a neutral, a licensed electrician can check this for you before you purchase.

Can I control more than one fan with a single wall control?

No. Each fan needs its own wall control. One wall control pairs with one fan, so if you have multiple fans, you’ll need a wall control for each.

Does the wall control require a neutral wire?

Yes. A neutral wire must be present at the wall switch for the wall control to operate. If you’re not sure whether your wiring includes a neutral, a licensed electrician can check this for you before you purchase.

What happens if there is a power outage?

The wall control and fan will retain their pairing after a power outage. Once power is restored, you can continue using the wall control as normal.